Wednesday, January 26, 2011
Steps to fix a slow computer
Issue:
My computer is running slow what steps can I do to fix it?
Cause
This issue can be caused by any of the below possibilities.
1.Not enough hard disk space.
2.Left over programs and bad files.
3.Data Corruption.
4.Missing Windows updates / Outdated drivers.
5.Computer is overheating.
6.Corrupt OS.
7.Bad Hardware.
Solution:
Below are steps for Microsoft Windows users that should help speed up the computer or determine why the computer is running slow.
Reboot
If your computer has not been reboot recently make sure to reboot it before following any of the below steps.
Not enough hard disk drive space
Verify that there is at least 200-500MB of free hard disk drive space. This available space allows the computer to have room for the swap file to increase in size as well as room for temporary files.
Popular Posts
-
Modems cannot handle the beep on BT's call waiting facility. If you have call waiting on your line you will need to disable it before us...
-
Motherboard - Is the main printed circuit in electronic device. Northbridge - Is the controller hub, they contro...
-
This is the standard way if you want to disassemble your Desktop Computer. 1. Remove left cover 2. Remove Power connectors 3. Remo...
-
Issue I have problems in Windows after installing new software. Cause After installing any utility, driver, or other software program...
-
Symptom Computer seems to be locked up and not responding. Possible solution Use the Windows Task Manager to close any programs not respon...
-
Ensure that your speakers are not too close to the monitor and that there is no other source of interference, especially from TVs, radios, ...
-
DIP - Dual Inline Package - The old standard for chip design. - Will always have an even numbers of pins. - Pin count can be as low as...
-
You have tried to start your computer with a disk in the floppy drive that doesn't contain any operating system files. Solution...
-
As obvious as this may sound it is probably a cable not attached correctly, or the monitor power button being turned off. Please unplug all...