Tuesday, February 8, 2011
NTLDR is Missing
Issue
NTLDR is Missing.
Related errors
Below are the full error messages that may be seen when the computer is booting.
NTLDR is Missing
Press any key to restart
Boot: Couldn't find NTLDR
Please insert another disk
NTLDR is missing
Press Ctrl Alt Del to Restart
Causes
1. Computer is booting from a non-bootable source.
2. Computer hard disk drive is not properly setup in BIOS.
3. Corrupt NTLDR and NTDETECT.COM file.
4. Misconfiguration with the boot.ini file.
5. Attempting to upgrade from a Windows 95, 98, or ME computer that is using FAT32.
6. New hard disk drive being added.
7. Corrupt boot sector / master boot record.
8. Seriously corrupted version of Windows 2000 or Windows XP.
9. Loose or Faulty IDE/EIDE hard disk drive cable.
10. Failing to enable USB keyboard support in the BIOS.
Solution:
Windows XP users
1. Insert the Windows XP bootable CD into the computer.
2. When prompted to press any key to boot from the CD, press any key.
3. Once in the Windows XP setup menu press the "R" key to repair Windows.
4. Log into your Windows installation by pressing the "1" key and pressing enter.
5. You will then be prompted for your administrator password, enter that password.
6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.
copy e:\i386\ntldr c:\
copy e:\i386\ntdetect.com c:\
7. Once both of these files have been successfully copied, remove the CD from the computer and reboot.
Popular Posts
-
Modems cannot handle the beep on BT's call waiting facility. If you have call waiting on your line you will need to disable it before us...
-
Motherboard - Is the main printed circuit in electronic device. Northbridge - Is the controller hub, they contro...
-
This is the standard way if you want to disassemble your Desktop Computer. 1. Remove left cover 2. Remove Power connectors 3. Remo...
-
Issue I have problems in Windows after installing new software. Cause After installing any utility, driver, or other software program...
-
Symptom Computer seems to be locked up and not responding. Possible solution Use the Windows Task Manager to close any programs not respon...
-
Ensure that your speakers are not too close to the monitor and that there is no other source of interference, especially from TVs, radios, ...
-
DIP - Dual Inline Package - The old standard for chip design. - Will always have an even numbers of pins. - Pin count can be as low as...
-
You have tried to start your computer with a disk in the floppy drive that doesn't contain any operating system files. Solution...
-
As obvious as this may sound it is probably a cable not attached correctly, or the monitor power button being turned off. Please unplug all...